Important Things That You Should Keep in Mind Before Going to Aircon installation Melbourne
There are mainly two parts important to function the air conditioning system. When you are going to get your Aircon installation Melbourne, it is important to come with right kind techniques to make the job done perfectly. If you are looking how to install this crucial piece of air-conditioning system, you need to make it sure that, the entire installation procedure is going smoothly.
It is a recommendation to hire a well experienced professional for all
these kind of installation process. Here are few things you should in keep in
mind before going to installing the AC.
Strength of the wall to hold the
AC
The indoor unit of split AC must be
installed on a wall strong enough to hold the unit’s weight.
Accurate
space between the AC and the wall
The indoor unit of split AC requires at
least 15 cm of open space surrounding its top and sides for proper air flow.
Height
from the ground
Mount the indoor unit of split AC at a
height of 7-8 feet above the ground for adequate cooling inside the room.
Accurate
tilt angle of the indoor unit
While fixing the aluminum bracket on wall
make sure that the bracket is given a slight tilt angle, so that the indoor
unit of split AC, when fitted is also at a slight angle to enable unrestricted
flow of the condensed water from the drain pipe.
Accurate
position of the outdoor unit
For proper cooling, mount the indoor and
outdoor units of split AC at location away from direct sunlight and water.
Install the outdoor unit of split AC in open space so that there is no
hindrance to the heat dissipated from the condenser. If you will ignore things,
you are likely go for the Aircon repairs Melbourne frequently.
Distance between indoor and
outdoor unit
The outdoor unit of
split AC must be placed on a flat and rigid surface. This unit contains key
components of split AC like compressor, condenser, fan motor etc. If the unit
is not on a flat surface, then won’t get accurate cooling.
Comments
Post a Comment